Connecting
Procedure
A
Turn on the computer.
B
Connect to the power cable (supplied).
C
Turn the projector on.
D
Connect to the USB cable.
When outputting audio from the projector's speaker, connect
an audio cable (commercially available) to the Audio2 port.
s "Connecting for the first time" p.24
s "From the second time" p.27
Attention
Connect the projector directly to the computer and not via a USB hub.
Connecting for the first time
The first time you connect, the driver needs to be installed. The procedure
is different for Windows and Mac OS.
Procedure
For Windows
A
Driver installation starts automatically.
When you are using Windows 2000, double-click My Computer -
EPSON_PJ_UD - EMP_UDSE.exe on your computer.
Connecting with a USB Cable and Projecting (USB Display)
24
To Next Page
Loading...
