By setting the Mail Notification function from the projector's Configuration
Menu, notification messages will be sent to the preset email addresses when
a problem or warning occurs with a projector. This will enable the operator
to be notified of problems with projectors even at locations away from the
projectors.
s "Network Menu" p.80, "Mail menu" p.87
q
• Up to a maximum of three notification destinations (Addresses) can
be recorded, and notification messages can be sent to all three
destinations at once.
• If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
• Monitoring is possible if Extended - Standby Setup - Standby
Mode is set to Network On from the projector's Configuration
menu, even if the projector is in standby mode (when the power is
off).
Using the Mail Notification Function to Report Problems
67
To Next Page
Loading...
