Installing the Touch Unit
118
i
Move the left and right pointers using the number [4] or [6] buttons on the remote control
to move them into the targets
When they are in the targets, the pointers are filled in ( ).
When the pointers on the left and right are filled in, press the [Enter] button on the remote control.
c
•
When you move one pointer, the other pointer also moves slightly. We recommend adjusting
the left and right pointers alternating a little at a time while checking the position of the pointers.
•
If the pointers move beyond the target positions, use the number [7] or [9] buttons on the remote
control to move the pointers in the opposite direction.
•
If you cannot move the pointers as intended, press the [Esc] button on the remote control and
start again from step 6.
To Next Page
Loading...
