About Event ID
If a network connection error occurs, an error log (Event ID) is displayed on the following screen.
Standby screen when the Source is set to LAN Press [Menu] button > Info menu screen
Check the numbers and then apply the following countermeasures.
Event ID Cause Remedy
0432
0435
Failed to startup EasyMP Network Projection. Restart the projector.
0434
0481
0482
0485
Network communication is unstable. Check the network communication status, and reconnect after waiting for a
while.
0433 Cannot play transferred images. Restart EasyMP Network Projection.
0484 Communication was disconnected from the computer.
04FE EasyMP Network Projection ended unexpectedly. Check the status of network communications. Restart the projector.
Network Setup
77
To Next Page
Loading...
