Name Function
J
[ ] button
• When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
s "Using the Configuration Menu" p.105
• Acts as a mouse's left button when using the optional
wireless mouse receiver.
s "Optional Accessories" p.171
K
[Split] button
Each time the button is pressed, the image changes
between projecting two images simultaneously by
splitting the projected screen, or projecting one image as
normal.
s "Projecting Two Images Simultaneously (Split
Screen)" p.87
L
[Page] buttons
[
[
][
]
]
When using the optional wireless mouse receiver, you can
change the PowerPoint file page during projection by
pressing the page up/page down buttons.
M
[Volume] buttons
[a][b]
Adjusts the volume for audio output from the Audio Out
port.
[a] Decreases the volume.
[b] Increases the volume.
s "Adjusting the Volume" p.50
N
[User1] button
[User2] button
[User3] button
Select any frequently used item from the eight available
Configuration menu items, and assign it to one of these
buttons. By pressing the button, the assigned menu item
selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments.
s "Settings Menu" p.110
O
Numeric buttons
• Enter the Password.
s "Setting Password Protection" p.99
• Use this button to enter numbers in Network settings
from the Configuration menu.
Name Function
P
[ID] button
Hold down this button and press the numeric buttons to
select the ID for the projector you want to operate using
the remote control.
s "ID Settings" p.34
Q
[ID] switch
Use this switch to enable (On)/disable (Off) ID settings for
the remote control.
s "ID Settings" p.34
R
Remote port
Connects the optional remote control cable set and
outputs signals from the remote control.
s "Optional Accessories" p.171
When the remote control cable is plugged into this remote
port, the remote control light-emitting is disabled.
S
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.128
T
[Num] button
Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protection" p.99
U
[E-Zoom] buttons
[z][x]
Enlarges or reduces the image without changing the
projection size.
s "Enlarging Part of the Image (E-Zoom)" p.91
V
[Default] button
Enabled when [Default]: Reset is displayed on the
configuration menu guide. The settings being adjusted are
returned to their default values.
s "Using the Configuration Menu" p.105
W
[Esc] button
• Stops the current function.
• If pressed when the Configuration menu is displayed, it
moves to the previous level.
s "Using the Configuration Menu" p.105
• Acts as a mouse's right button when using the optional
wireless mouse receiver.
s "Optional Accessories" p.171
Part Names and Functions
19
To Next Page
