Epson EB-G6970WU - Adjusting to Match Colors

To continue to move another point, press the [Esc] button to return
to step 4, and then repeat steps 4 and 5.
f
After moving all of the necessary points, press the [Esc] button to
return to step 4, and then press the [Esc] button again. When a
message is displayed, select Yes, and then press the [
] button.
The screen from step 3 is displayed.
g
Select Color Adjustment, and then press the [ ] button.
h
Adjust the brightness and tone for the areas that do not overlap
to match the areas that overlap.
a
To return Black Level to its default values, press the [Esc]
button to return to the screen from step 7, select Reset, and
then press the [
] button.
i
To complete the adjustment, press the [Menu] button.
Adjusting to Match Colors
Follow the steps below to adjust the brightness of the projected image and
the color balance that was adjusted by performing edge blending.
a
The brightness and color may not be uniform even after making
adjustments.
a
Press the [Menu] button while projecting.
Multi-Projection Function
84