The shape of a test pattern is according to the setting of Screen Type. Set
Screen Type first.
s "Screen Settings" p.27
a
Press the [Test Pattern] button of the remote control or the [ ]
button on the control panel while projecting.
b
Press the [ ][ ] buttons on the remote control or the [ ] button
on the control panel to change the test pattern.
Using the remote control Using the control panel
The following image adjustments can be made while the test pattern
is being displayed.
Top Menu Name Sub Menu/Items
Image
Color Mode s p.71
Color Temp.
Advanced
- Gamma
*1
s p.75
- RGB
- RGBCMY s p.75
Reset
Signal
Auto Setup
Installing the Projector
29
To Next Page
Loading...
