Epson EB-G6970WU - Page 81

Submenu Function
Edge Blending
Set to On to activate the edge blending function.
Set to Off when not projecting from multiple
projectors.
Top Edge/Bottom
Edge/Right Edge/Left
Edge
Blending: Set to On to activate the edge blending
function towards where you are setting, and the
brend range will be shaded.
Blend Range: Adjusts the range to be shaded.
Adjustment is possible at the level of one pixel. The
maximum range is 45% of the resolution.
Black Level
Adjusts the differences in brightness and tone for
areas where images overlap and areas where the
images do not overlap.
s "Black Level" p.82
Guide Display
Set to On to display the guide on the edge blending
setting range.
Pattern Guide
Set to On to display a guide to match the position of
the edge blending setting range.
Submenu Function
Guide Colors
You can select the combination of guide colors
from the three.
d
Turn on Edge Blending.
(1)
Select Edge Blending, and then press the [
] button.
(2)
Select On, and then press the [
] button.
(3) Press the [Esc] button.
e
Set Guide Display to On.
(1)
Select Guide Display, and then press the [
] button.
(2)
Select On, and then press the [
] button.
(3) Press the [Esc] button.
a
If the guide is not clear, you can change the color of the guide
on Guide Colors.
f
Set Pattern Guide to On.
(1)
Select Pattern Guide, and then press the [
] button.
(2)
Select On, and then press the [
] button.
(3) Press the [Esc] button.
g
Set Top Edge/Bottom Edge/Right Edge/Left Edge.
(1)
Select Top Edge/Bottom Edge/Right Edge/Left Edge to set the edge
blending, and then press the [
] button.
(2)
Select Blending, and then press the [
] button.
(3)
Select On, and then press the [
] button.
(4) Press the [Esc] button.
Multi-Projection Function
81