121
3. Press the Enter button or the left or right arrow button on the remote control, or press Enter on
the control panel to cycle through the available test patterns.
4. Adjust the image as necessary.
5. Press the Esc button to clear the test pattern.
Available Test Pattern Image Adjustments
Parent topic: Using Basic Projector Features
Related tasks
Setting the Screen Type
Available Test Pattern Image Adjustments
You can adjust the following settings while the test pattern is displayed.
Menu Settings
Image Color Mode
White Balance
Advanced
• Gamma
1
• RGBCMY
Settings Geometry Correction
Brightness Settings
Extended Display
2
Multi-Projection
3
1
Except for custom Gamma settings
To Next Page
Loading...
