EasyManuals Logo

Epson EB-PU1007B User Manual

Epson EB-PU1007B
329 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #201 background imageLoading...
Page #201 background image
201
Adjusting the Black Level
When two images overlap, the overlapping area can appear differently from the areas that do not
overlap. You can use the projector's Black Level setting to make the difference less noticeable.
You cannot adjust the Black Level setting if you are displaying a test pattern, if the Edge Blending
setting is set to Off, or no edge position is selected.
Note: You may not be able to adjust the black levels correctly if the Geometry Correction settings are
set too high. The brightness and tone of the overlapping areas may differ from the rest of the image even
after adjusting the black level.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select the Multi-Projection setting and press Enter.
4. Select the Black Level setting and press Enter.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-PU1007B and is the answer not in the manual?

Epson EB-PU1007B Specifications

General IconGeneral
Matrix size0.76 \
Heat dissipation1465.4 BTU/h
Number of colors1.07 billion colors
Native aspect ratio16:10
Projection technology3LCD
Contrast ratio (typical)2000:1
Screen size compatibility- \
Projector native resolutionWUXGA (1920x1200)
Keystone correction, vertical-45 - 45 °
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)4900 ANSI lumens
Light source typeLaser
Service life of light source20000 h
Service life of light source (economic mode)30000 h
Throw ratio0.35 - 10.11:1
Focal length rangevaries by lens mm
Interchangeable lensYes
3DNo
Video processing10 bit
Video color modesCinema, Dynamic, Natural, Presentation, DICOM simulation mode, Multi-projection, BT.709
Analog signal format systemNot supported
Serial interface typeRS-232C
USB 2.0 ports quantity2
Noise level33 dB
Country of originPhilippines
Noise level (economic mode)29 dB
PlacementCeiling, Desktop, Flying frame
Product typeLarge venue projector
Product colorBlack
Market positioningPresentation
Cable lock slot typeKensington
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)431 W
Power consumption (economy mode)366 W
Storage temperature (T-T)-10 - 60 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Bundled softwareInhalt DIY-App, EasyMP Multi PC Projection, Epson Projektor Content Manager, Epson Projektor Management, Epson Projektor Professional Tool
Supported network protocolsHTTPS, IPv6, SNMP, ESC/VP.net, PJLink
Software supportvia: Crestron Integrated Partner, Extron IP Link, Extron XTP, AMX Device Discovery
Pallet weight0 g
Quantity per pack1 pc(s)
Quantity per pallet14 pc(s)
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth436 mm
Width545 mm
Height189 mm
Weight16300 g
Package depth760 mm
Package width570 mm
Package height270 mm
Package weight21465 g

Related product manuals