Epson EB-PU1007B User Manual

288
Related references
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Supported Video Display Formats
Solutions When the Image is Fuzzy or Blurry
If the projected image is fuzzy or blurry, try the following solutions:
• Adjust the image focus.
• Clean the projector lens.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the
projector warm up to room temperature before using it.
• Position the projector close enough to the screen.
• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
• Adjust the Sharpness setting in the Image menu to improve image quality.
• If you are projecting from a computer, press the Auto button on the remote control to automatically
adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned
image on the screen and manually adjust the Tracking and Sync settings in the Signal menu.
• If you are projecting from a computer, try using a lower resolution or try to match the projector's native
resolution.
Parent topic: Solving Image or Sound Problems
Related concepts
Projector Connections
Related references
Projector Setup and Installation Options
General Projector Specifications
Image Quality Settings - Image Menu
Supported Video Display Formats
Related tasks
Focusing the Image Using the Focus Buttons
Cleaning the Lens

Epson EB-PU1007B Specifications

General

Matrix size	0.76 \
Heat dissipation	1465.4 BTU/h
Number of colors	1.07 billion colors
Native aspect ratio	16:10
Projection technology	3LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Keystone correction, vertical	-45 - 45 °
Keystone correction, horizontal	-30 - 30 °
Projector brightness (economic mode)	4900 ANSI lumens
Light source type	Laser
Service life of light source	20000 h
Service life of light source (economic mode)	30000 h
Throw ratio	0.35 - 10.11:1
Focal length range	varies by lens mm
Interchangeable lens	Yes
3D	No
Video processing	10 bit
Video color modes	Cinema, Dynamic, Natural, Presentation, DICOM simulation mode, Multi-projection, BT.709
Analog signal format system	Not supported
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Noise level	33 dB
Country of origin	Philippines
Noise level (economic mode)	29 dB
Placement	Ceiling, Desktop, Flying frame
Product type	Large venue projector
Product color	Black
Market positioning	Presentation
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	431 W
Power consumption (economy mode)	366 W
Storage temperature (T-T)	-10 - 60 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Bundled software	Inhalt DIY-App, EasyMP Multi PC Projection, Epson Projektor Content Manager, Epson Projektor Management, Epson Projektor Professional Tool
Supported network protocols	HTTPS, IPv6, SNMP, ESC/VP.net, PJLink
Software support	via: Crestron Integrated Partner, Extron IP Link, Extron XTP, AMX Device Discovery
Pallet weight	0 g
Quantity per pack	1 pc(s)
Quantity per pallet	14 pc(s)
Harmonized System (HS) code	85286200

Weight and Dimensions

Depth	436 mm
Width	545 mm
Height	189 mm
Weight	16300 g
Package depth	760 mm
Package width	570 mm
Package height	270 mm
Package weight	21465 g