214
Note: You can also access this screen by pressing the Memory button on the remote control.
5. Select one of the following options:
• Memory: Saves or loads various settings; you can save up to 10 different memories
Note: The following settings are saved: all settings from the Image menu, the Scale setting from
the Signal menu, the Brightness Settings from the Settings menu, and the Edge Blending,
Black Level, and Color Matching settings from the Extended menu.
• Lens Position: Saves or loads settings related to the lens such as the lens shift, focus, zoom, and
distortion adjustment settings; you can save up to 10 different memories
• Geometry Correction: Saves or loads any adjustments made in the Geometry Correction
setting in the Settings menu; you can save up to 3 different memories
You see this screen:
6. Select one of the following options:
• Load Memory: Overwrites your current settings with saved settings
• Save Memory: Saves your current settings to memory
Note: A memory name that has already been used is indicated by a blue mark. Saving over a
previously saved memory overwrites the settings with your current settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
