Hazard Distance according to IEC62471-5
190
When using projectors and interchangeable lenses that change to Risk Group
3, no direct exposure to the beam is permitted. Operators must control access
to the beam within the hazard distance or install the product at a height that
will prevent eye exposure within the hazard distance.
Looking into the lens at the hazard distances closer than those indicated here
can cause damage to eyesight.
EB‑‑PU2216B/EB‑‑PU2116W:
EB‑‑PU2213B/EB‑‑PU2113W:
To Next Page
Loading...
