Epson EB-PU2116B User Manual

51
3. Tighten both cable cover screws.
To remove the cover, loosen both screws and pull the cover off of the projector.
Parent topic: Setting Up the Projector
Installing the Safety Wire
When you use the optional ceiling mount, you can install the safety wire (not included) to prevent the
projector from falling from the mount.
1. Secure the ring of the safety wire using the M6 × 15 mm bolt included with the safety wire set.
2. Loop the safety wire through the ceiling mount to secure it.

Epson EB-PU2116B Specifications

General

Projection System	3LCD
Resolution	WUXGA (1920 x 1200)
Contrast Ratio	2, 500, 000:1
Color Reproduction	Up to 1.07 billion colors
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Control	RS-232C, LAN, USB
Light Source	Laser
Laser Life	20, 000 hours
Aspect Ratio	16:10
LCD Panel	0.76 inch
Brightness	16000 lumens
Lens	Optional lens
Lens Shift	Vertical: ±60%, Horizontal: ±18% (varies by lens)
Input Ports	HDMI, HDBaseT, VGA
Output Terminals	3G-SDI
Throw Ratio	2.84:1
Weight	23 kg
Projection Lens	Optional