Epson EB-PU2116B - Page 160

Projector Status Display Messages
160
Maintenance category
Information Description
Operation Time Displays the projector's total operation time.
Laser Op. Time Displays the laser operating time for each Light Source
Mode setting.
Version category
Information Description
Serial No. Displays the projector's serial number.
Main Display the projector's firmware version information.
Video2
Sub
Sub2
HDMI
HDMI2
HDBaseT
Pixel Shift
System status information
Status Description
OK The projector is in normal operating mode.
Warm-up The projector is warming up.
Standby The projector is in standby mode.
Cool Down The projector is cooling down.
Status Description
Temp Error A high temperature error occurred.
You can check the following status in the Epson Projector
Management software or the Projector Config Tool app.
• Temp Error 09(AIR)
• Temp Error 0C(PS2)
• Temp Error 12(PHW)
• Temp Error 1D(PS1)
• Temp Error 23(PFC1)
• Temp Error 24(HDBT)
• Temp Error 25(VIC)
• Temp Error 26(SML)
• Temp Error 2A(LVR)
• Temp Error 2B(LVG)
• Temp Error 2C(LVB)
• Temp Error 2F(LD1)
• Temp Error 30(LD2)
• Temp Error 34(PS3)
• Temp Error 3D(INA1)
• Temp Error 46(LLC1)
• Temp Error 47(LLC2)
• Temp Error 4B(LDDR1)
• Temp Error 4C(LDDR2)
• Temp Error 4D(LDDR3)
• Temp Error 63(RGB-R)
• Temp Error 64(RGB-B)
• Temp Error FE
The device ID number might also be displayed.