Epson EB-PU2116B - Shutter Settings; Remote Control Type; Beep; Indicators

Extended Menu
97
Fade-in
Set the number of seconds for a fade-in transition effect when displaying
an image.
Fade-out
Set the number of seconds for a fade-out transition effect when hiding an
image.
A/V Mute Timer
Turns off the projector automatically if A/V Mute is enabled and 2 hours
of inactivity has passed.
Release A/V Mute
Select A/V Mute if you want to use only the [A/V Mute] button to turn off
A/V mute or if you want to send a command to turn off A/V Mute, or
select Any Button to use any button to turn it off.
Shutter Settings
s Extended > Operation > Shutter Settings
You can adjust the shutter settings (EB‑PU2216B/EB‑PU2213B).
Fade-in
Set the number of seconds for a fade-in transition effect when displaying
an image.
Fade-out
Set the number of seconds for a fade-out transition effect when hiding an
image.
Shutter Timer
Turns off the projector automatically if the shutter is enabled and two
hours of inactivity have passed.
Shutter Release
Select Shutter to turn off the shutter function by using the [A/V Mute]
button only or by sending a command to turn off the shutter. Select Any
Button to use any button to turn off the shutter function.
Startup
Sets the shutter status when the projector is turned on.
Standby
Sets the shutter status when the projector is turned off. Select Last Used if
you want to maintain the current shutter status when the projector is
turned off.
Remote Control Type
s Extended > Operation > Advanced > Remote Control Type
If you want to adjust the zoom/focus/distortion of the projected image using
the Epson remote control as shown below, select Advanced as the Remote
Control Type setting.
Beep
s Extended > Operation > Advanced > Beep
You can control the beep that sounds when you turn the projector on or off.
Indicators
s Extended > Operation > Advanced > Indicators