Multi-Projection Features
131
the projectors (this projector becomes the master projector), using the
Quick Corner menu.
d
Select Start Auto Adjustment and follow the on-screen instructions.
When the automatic adjustment has finished, if there are any gaps in the
pixels of the projected images, adjust the Point Correction setting manually.
a
• The required time for simple stacking varies depending on the
projector layout. It can take up to approximately 4 minutes.
• If you have not installed the optional external camera, adjust the
following settings manually:
• Focus
• Zoom
• Lens Shift
• Geometry Correction
gg Related Links
• "Point Correction" p.60
• "Focus/Distortion" p.60
• "Zoom" p.59
• "Lens Shift" p.58
• "Simple Stacking" p.103
• "Conditions for Simple Stacking" p.104
• "IP Settings" p.110
• "Geometry Correction" p.81
Adjusting Colors
Display the test patterns from all projectors to check each color tone.
If you need adjust the color tone, perform the following operations:
• Adjust the Hue, Saturation, and Brightness settings for individual image
colors.
s Image > Advanced > RGBCMY
• Adjust the overall tint of the image.
s Image > White Balance
a
We recommend displaying the following test patterns:
Gray Bars V, Gray Bars H, and White
To Next Page
Loading...
