Epson EB-S41 User Manual

Projector Lamp Maintenance
133
a
• Make sure the lamp cover is securely installed or the lamp will
not turn on.
• Do not replace the lamp cover with too much force and make
sure the lamp cover is not deformed.
Reset the lamp timer to zero to monitor the new lamp's usage.
gg Related Links
• "Replacement Parts" p.152
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the
lamp replacement message and to monitor lamp usage correctly.
a
Do not reset the lamp timer if you have not replaced the lamp to avoid
inaccurate lamp usage information.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Reset menu and press [Enter].
d
Select Reset Lamp Hours and press [Enter].
You see a prompt asking if you want to reset the lamp hours.
e
Select Yes and press [Enter].
f
Press [Menu] or [Esc] to exit the menus.

Epson EB-S41 Specifications

General

Contrast Ratio	15, 000:1
Lamp Type	UHE
Keystone Correction	Vertical: ±30 degrees
Weight	2.5 kg
Projection Ratio	1.45 - 1.96:1
Screen Size	30 inches - 350 inches
Dimensions	302‎ x 237 x 82 mm (Width x Depth x Height)
Projection System	3LCD
Brightness	3, 300 lumens
Lamp Life	5, 000 hours (normal) / 10, 000 hours (eco)
Connectivity	USB 2.0 Type A, USB 2.0 Type B, VGA, HDMI, Audio in/out
Security	Kensington lock, Password protection
Color Modes	Dynamic, Presentation, sRGB, Cinema, Blackboard
Noise Level	37 dB (Normal) / 28 dB (Eco)
Native Resolution	SVGA (800 x 600)