EasyManuals Logo

Epson EB-S41 User Manual

Epson EB-S41
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
Color Difference Correction when Projecting from Multiple Projectors
70
When lining up multiple projectors to project images, you can correct the
brightness and color tone of each projector's image so that the images match
closely.
You can set a unique projector ID for each projector to operate them
individually using a remote control, and then correct the brightness and color
for each projector.
a
In some cases the brightness and color tone may not match
completely even after correction.
If brightness and color tone differences become more noticeable over
time, repeat the adjustments.
gg Related Links
"Setting the Projector ID" p.70
"Selecting the Projector You want to Operate" p.70
"Matching Multiple-Projector Display Quality" p.72
Setting the Projector ID
To control multiple projectors from a remote control, give each projector a
unique ID.
a
Press the [Menu] button on the control panel or remote control.
b
Select the Extended menu and press [Enter].
c
Select Projector ID and press [Enter].
d
Use the arrow buttons to select the identification number you want to
use for the projector. Then press [Enter].
e
Press [Menu] or [Esc] to exit the menus.
Repeat these steps for all the other projectors you want to operate from one
remote control.
Selecting the Projector You want to Operate
After setting the projector's ID, select the ID for the projector you want to
operate using the remote control.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-S41 and is the answer not in the manual?

Epson EB-S41 Specifications

General IconGeneral
Contrast Ratio15, 000:1
Lamp TypeUHE
Keystone CorrectionVertical: ±30 degrees
Weight2.5 kg
Projection Ratio1.45 - 1.96:1
Screen Size30 inches - 350 inches
Dimensions302‎ x 237 x 82 mm (Width x Depth x Height)
Projection System3LCD
Brightness3, 300 lumens
Lamp Life5, 000 hours (normal) / 10, 000 hours (eco)
ConnectivityUSB 2.0 Type A, USB 2.0 Type B, VGA, HDMI, Audio in/out
SecurityKensington lock, Password protection
Color ModesDynamic, Presentation, sRGB, Cinema, Blackboard
Noise Level37 dB (Normal) / 28 dB (Eco)
Native ResolutionSVGA (800 x 600)

Related product manuals