Epson EB-S41 User Manual

Wireless Network Projection from a Mobile Device (Screen Mirroring)
87
c
Select Screen Mirroring On as the Wireless Mode setting.
d
Select Screen Mirroring Settings and press [Enter].
e
Set the Display Name setting as necessary.
f
Select the Operation Mode setting.
• Basic lets you connect with basic options.
• Extended lets you connect with advanced options.
g
Select the Basic setting as necessary.
• Wireless LAN Sys. lets you select the type of wireless LAN system
the projector is connecting to.
• Adjust Image Quality lets you adjust the screen mirroring
speed/quality. Select a small number to improve the quality and
select large number to increase the speed.
• Connection Mode lets you select the type of WPS (Wi-Fi Protected
Setup). Available only for the Basic operation mode.
h
For the Extended operation mode, select the Extended setting.
• Meeting Mode lets you select the type of meeting. Select
Interruptions OK to connect to another mobile device during
Screen Mirroring projection or No Interruptions to exclusively
connect to one device.
• Channel lets you select the wireless channel used by Screen
Mirroring.

Epson EB-S41 Specifications

General

Contrast Ratio	15, 000:1
Lamp Type	UHE
Keystone Correction	Vertical: ±30 degrees
Weight	2.5 kg
Projection Ratio	1.45 - 1.96:1
Screen Size	30 inches - 350 inches
Dimensions	302‎ x 237 x 82 mm (Width x Depth x Height)
Projection System	3LCD
Brightness	3, 300 lumens
Lamp Life	5, 000 hours (normal) / 10, 000 hours (eco)
Connectivity	USB 2.0 Type A, USB 2.0 Type B, VGA, HDMI, Audio in/out
Security	Kensington lock, Password protection
Color Modes	Dynamic, Presentation, sRGB, Cinema, Blackboard
Noise Level	37 dB (Normal) / 28 dB (Eco)
Native Resolution	SVGA (800 x 600)