111
Projector Network Settings - Network Menu
Setting Options Description Setting Options Description
Connection Mode Quick Select the type of wireless connection: SSID Display On Select whether to display the SSID on the
network standby screen.
Advanced Quick: lets you quickly connect to one Off
computer.
IP Address Display On Select whether to display the IP address
The projector becomes an easy access
on the network standby screen.
Off
point. Select the type of security and set
passphrase in the Security menu as
necessary to use EasyMP Network
Projection to connect in Quick
Network Menu - Security Menu
connection mode.
Advanced: lets you connect to multiple
Settings on the Security menu let you select the type of security and security
computers over a wireless network access
settings that match the network you are connecting the projector to.
point. The connection is established in
s Network > Network Configuration > Security
infrastructure mode.
Channel 1ch In Quick connection mode, selects the
frequency band (channel) used by the
6ch
wireless LAN.
11ch
SSID Up to 32 Sets the SSID (network name) of the
alphanumeric wireless LAN system the projector is
characters connecting to.
Search Access Point To Search View Search for available wireless network
access points in Advanced connection
mode. Depending on the access point
settings, they may not be displayed in the
list. You must set security separately.
IP Settings DHCP DHCP: set to On if your network assigns
addresses automatically; set to Off to
IP Address
manually enter the network's IP
Subnet Mask
Address, Subnet Mask, and Gateway
Gateway Address
Address using 0 to 255 for each address
field.
Setting Options Description
Do not use these addresses: 0.0.0.0,
Security Open Selects the type of security used on the
127.x.x.x or 224.0.0.0 through
wireless network.
WPA2-PSK
255.255.255.255 (where x is a number
When setting security, follow the
WPA/WPA2-PSK
from 0 to 255) for IP Address and
instructions from the administrator of
Gateway Address and 0.0.0.0 and
the network system you want to connect
255.255.255.255 for Subnet Mask.
to.
To Next Page
Loading...
Need help?
General
