Epson EB-X31 User Manual

55
Controlling the Volume with the Volume Buttons
• "Projector Feature Settings - Settings Menu" p.105
The volume buttons control the projector's internal speaker system.
You must adjust the volume separately for each connected input source.
a
Turn on the projector and start a presentation.
b
To lower or raise the volume, press the [Volume] buttons on the
control panel or remote control as shown.
The [Volume] buttons on the control panel are available only
with EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-
a
W04/EB-X04/EB-U130/EB-W130/EB-X130/EB-X350/EB-X300.
A volume gauge appears on the screen.
c
To set the volume to a specific level for an input source, select Volume
in the projector's Settings menu.
Caution
Do not start a presentation at a high volume setting. Sudden loud noises may cause
hearing loss.
Always lower the volume before powering off, so that you can power on and then
gradually increase the volume.
gg Related Links

Epson EB-X31 Specifications

General

Projection Technology	3LCD
Resolution	XGA (1024 x 768)
Contrast Ratio	15000:1
Lamp Life Normal	5000 hours
Lamp Life ECO	10000 hours
Projection Ratio	1.48 - 1.77:1
Zoom	1.2x
Screen Size	30 inches - 300 inches
Weight	2.4 kg
Brightness	3200 lumens
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Inputs	HDMI, VGA, USB 2.0 Type A, USB 2.0 Type B, Composite
Output Ports	VGA
Security	Kensington lock, Password protection
Color Modes	Dynamic, Presentation, Cinema, sRGB, Blackboard