Epson EB-X31 User Manual

49
Selecting an Image Source
When multiple image sources are connected to the projector, such as a
This screen is displayed when no image signal is detected.
computer and DVD player, you can switch from one image source to the
Check the cable connections between the projector and image
a
other.
source.
a
Make sure the connected image source you want to use is turned on.
b
For video image sources, insert a DVD or other video media and press
play.
c
Do one of the following:
• Press the [Source Search] button on the control panel or remote
control until you see the image from the source you want.
• Press the button for the source you want on the remote control. If
there is more than one port for that source, press the button again to
cycle through the sources.
A
Computer port source (Computer port)
B
Video, S-Video, HDMI, and MHL sources (Video, S-Video, HDMI,
and HDMI/MHL ports)
C
USB port sources (USB-B port and external devices connected to the
USB-A port)
D
Network source (LAN)

Epson EB-X31 Specifications

General

Projection Technology	3LCD
Resolution	XGA (1024 x 768)
Contrast Ratio	15000:1
Lamp Life Normal	5000 hours
Lamp Life ECO	10000 hours
Projection Ratio	1.48 - 1.77:1
Zoom	1.2x
Screen Size	30 inches - 300 inches
Weight	2.4 kg
Brightness	3200 lumens
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Inputs	HDMI, VGA, USB 2.0 Type A, USB 2.0 Type B, Composite
Output Ports	VGA
Security	Kensington lock, Password protection
Color Modes	Dynamic, Presentation, Cinema, sRGB, Blackboard