Epson EB-X31 User Manual

132
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the
batteries as soon as they run out.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to
ensure the batteries are inserted the correct way. If the batteries are not used
Attention
correctly, they could explode or leak causing a fire, injury, or damage to the
Make sure you read the Safety Instructions before handling the batteries.
product.
a
Open the battery cover as shown.
d
Close the battery cover and press it down until it clicks into place.
b
Remove the old batteries.
c
Insert the batteries with the + and – ends facing as shown.

Epson EB-X31 Specifications

General

Projection Technology	3LCD
Resolution	XGA (1024 x 768)
Contrast Ratio	15000:1
Lamp Life Normal	5000 hours
Lamp Life ECO	10000 hours
Projection Ratio	1.48 - 1.77:1
Zoom	1.2x
Screen Size	30 inches - 300 inches
Weight	2.4 kg
Brightness	3200 lumens
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Inputs	HDMI, VGA, USB 2.0 Type A, USB 2.0 Type B, Composite
Output Ports	VGA
Security	Kensington lock, Password protection
Color Modes	Dynamic, Presentation, Cinema, sRGB, Blackboard