Epson EB-X39 User Manual

Using the Displayed Keyboard
125
You can use the displayed keyboard to enter numbers and characters.
a
Use the arrow buttons on the control panel or remote control to
highlight the number or character you want to enter and press the
[Enter] button.
a
Each time you select the CAPS key, the characters change
between upper case and lower case. Each time you select the
SYM1/2 key, the symbols enclosed by the frame change.
b
After entering the text, select Finish on the keyboard to confirm your
entries. Select Cancel to cancel entering text.
a
You can select projector settings and control projection over a network
using a Web browser from your computer.
Some symbols cannot be entered using the displayed keyboard. Use
your Web browser to enter the text.
gg Related Links
• "Available Text Using the Displayed Keyboard" p.125
• "Controlling a Networked Projector Using a Web Browser" p.107
Available Text Using the Displayed Keyboard
You can enter the following text when using the displayed keyboard.
Text type Details
Numbers 0123456789
Alphabet ABCDEFGHIJKLMNOPQRSTUVWXY
Z
abcdefghijklmnopqrstuvwxyz
Symbols ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ]
^ _ ` { | } ~

Epson EB-X39 Specifications

General

Resolution	XGA (1024 x 768)
Contrast Ratio	15, 000:1
LCD Panel	0.55 inch with MLA (D10)
Projection Ratio	1.48 - 1.77:1
Lens	Optical
Screen Size	30 inches - 300 inches
3D	No
Brightness	3500 lumens
Lamp Life	12, 000 hours (ECO mode)
Connectivity	HDMI, VGA, USB
Projection System	3LCD
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Zoom	1.2x
Interfaces	HDMI in, VGA in, USB Type-A, USB Type-B, Composite in, Audio in
Security	Kensington lock, Password protection
Speakers	2 W
Noise Level	37 dB (Normal)
Dimensions	302 x 237 x 82 mm (Width x Depth x Height)