Epson EB-X39 User Manual

Saving a User Pattern
76
There are four types of patterns pre-registered in the projector, such as ruled
lines and grid patterns. You can project these patterns to aid in presentations
using the Pattern Display settings in the Settings menu.
You can also save the image that is currently being projected as a User
Pattern.
a
Once you save a User Pattern, the pattern cannot be returned to the
factory default.
a
Project the image you want to save as the User Pattern, and then press
the [Menu] button on the control panel or remote control.
b
Select the Settings menu and press [Enter].
c
Select Pattern and press [Enter].
d
Select User Pattern and press [Enter].
You see a prompt asking if you want to use the displayed image as a
User Pattern.
a
Adjustments such as Keystone, E-Zoom, or Aspect are
temporarily cancelled when you select User Pattern.
e
Select Yes and press [Enter].
You see a prompt asking if you want to save the image as the User
Pattern.
f
Select Yes and press [Enter].
You see a completion message.

Epson EB-X39 Specifications

General

Resolution	XGA (1024 x 768)
Contrast Ratio	15, 000:1
LCD Panel	0.55 inch with MLA (D10)
Projection Ratio	1.48 - 1.77:1
Lens	Optical
Screen Size	30 inches - 300 inches
3D	No
Brightness	3500 lumens
Lamp Life	12, 000 hours (ECO mode)
Connectivity	HDMI, VGA, USB
Projection System	3LCD
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Zoom	1.2x
Interfaces	HDMI in, VGA in, USB Type-A, USB Type-B, Composite in, Audio in
Security	Kensington lock, Password protection
Speakers	2 W
Noise Level	37 dB (Normal)
Dimensions	302 x 237 x 82 mm (Width x Depth x Height)