Projector Feature Settings - Settings Menu
129
Options on the Settings menu let you customize various projector features.
Setting Options Description
Keystone Adjusts image shape to rectangular
(horizontally and vertically).
H/V-Keystone H/V-Keystone: select to manually
correct horizontal and vertical sides, or
turn automatic correction on or off.
You can also turn H-Keystone Adjuster
on or off.
Quick Corner Quick Corner: select to correct image
shape and alignment using an on-screen
display.
Split Screen Screen Size
Source
Swap Screens
Audio Source
Align
Display the QR
Code
Exit Split Screen
Divides the viewing area horizontally and
displays two images side-by-side (press
[Esc] to cancel split screen display).
Setting Options Description
Zoom * Varying levels
available
Adjusts the size of the projected image.
Volume Varying levels
available
Adjusts the volume of projector’s speaker
system.
You can also adjust the volume of
external speakers.
Setting values are saved for each source.
Mic Input Level ** Varying levels
available
Adjusts the input level from a
microphone.
When Mic Input Level is turned up, the
volume of the other connected device is
turned down; when it is turned down,
the volume of the other connected device
is turned up.
Lock Setting Control Panel Lock Controls projector button locking to
secure the projector:
Full Lock: locks all buttons.
Partial Lock: locks all buttons except the
power button.
Off: no buttons locked.
Pointer Shape
Pointer 1:
Pointer 2:
Pointer 3:
Changes the shape of the remote control
pointer.
Remote Receiver Front/Rear
Front
Rear
Off
Limits reception of remote control
signals by the selected receiver; Off turns
off all receivers.
To Next Page
Loading...
Need help?
General
