Epson EB-X39 User Manual

Projector Lamp Maintenance
163
a
• Make sure the lamp cover is securely installed or the lamp will
not turn on.
• Do not replace the lamp cover with too much force and make
sure the lamp cover is not deformed.
Reset the lamp timer to zero to monitor the new lamp's usage.
gg Related Links
• "Replacement Parts" p.183
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the
lamp replacement message and to monitor lamp usage correctly.
a
Do not reset the lamp timer if you have not replaced the lamp to avoid
inaccurate lamp usage information.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Reset menu and press [Enter].
d
Select Reset Lamp Hours and press [Enter].
You see a prompt asking if you want to reset the lamp hours.
e
Select Yes and press [Enter].
f
Press [Menu] or [Esc] to exit the menus.

Epson EB-X39 Specifications

General

Resolution	XGA (1024 x 768)
Contrast Ratio	15, 000:1
LCD Panel	0.55 inch with MLA (D10)
Projection Ratio	1.48 - 1.77:1
Lens	Optical
Screen Size	30 inches - 300 inches
3D	No
Brightness	3500 lumens
Lamp Life	12, 000 hours (ECO mode)
Connectivity	HDMI, VGA, USB
Projection System	3LCD
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Zoom	1.2x
Interfaces	HDMI in, VGA in, USB Type-A, USB Type-B, Composite in, Audio in
Security	Kensington lock, Password protection
Speakers	2 W
Noise Level	37 dB (Normal)
Dimensions	302 x 237 x 82 mm (Width x Depth x Height)