Remote Control
Name Function
A
Power button
[
t
]
Turns the projector power on or off.
s "From Installation to Projection" p.28
B
[Computer] button
Changes to images from the Computer port.
C
[Video] button
Each time the button is pressed, the image cycles through
the Video, S-Video, and HDMI ports.
D
Numeric buttons
Enter the Password.
s "Setting Password Protect" p.57
E
[Auto] button
If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize Tracking,
Sync., and Position.
F
[Aspect] button
Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image"
p.41
G
[Num] button
Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protect" p.57
H
[Menu] button
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.68
I
[ ][ ][ ][ ]
buttons
• When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s "Using the Configuration Menu" p.68
• When projecting using PC Free, pressing these buttons
displays the previous/next image, rotates the image, and
so on.
s "PC Free operating methods" p.46
• During Wireless Mouse function, the mouse pointer
moves in the direction of the button that was pushed.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.54
Part Names and Functions
14
To Next Page
Loading...
Need help?
General
