Image Menu
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.29
Submenu Function
Color Mode
You can select the quality of the image to suit your surroundings.
s "Selecting the Projection Quality (Selecting Color Mode)"
p.40
Brightness
You can adjust the image brightness.
Contrast
You can adjust the difference between light and dark in the
images.
Color Saturation
You can adjust the color saturation for the images.
Tint
(Adjustment is possible when a component video signal is being
input. If a composite video or S-video signal is input, adjustment
is only possible when NTSC signals are being input.)
You can adjust the image tint.
Submenu Function
Sharpness
You can adjust the image sharpness.
Color Temp.
Adjusts the tint for the images. You can adjust tints in three stages
from High, Medium, and Low. The image is tinted blue when
High is selected, and tinted red when Low is selected.
Color Adjust‐
ment
You can adjust the color strength for Red, Green, and Blue
individually.
Auto Iris
Set to Normal or High Speed to adjust the iris to obtain the
optimum light for images being projected. Select High Speed to
make faster iris corrections to match the speed of the scene.
The setting is stored for each Color Mode.
s "Setting Auto Iris" p.40
Reset
You can reset all adjustment values for the Image menu to their
default settings. See the following to return all menu items to
their default settings.
s "Reset Menu" p.84
Signal Menu
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
You cannot make settings on the Signal menu when the source is USB
Display, USB, or LAN.
List of Functions
71
To Next Page
Loading...
Need help?
General
