To Next Page

To Previous Page

• Use an HDMI cable that meets the HDMI standards.

• If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projector.

• The cable to be connected to the projector varies depending on the type of video signal being output by the video equipment. The video equipment may be able

to output different types of video signal. The following shows standard image resolutions, from the highest resolution to the lowest.

Component video > S-video > Composite video

See the documentation supplied with the video equipment to check what types of video signal it can output. Composite video may be listed as "video

output".

• When a game console is connected, the projected image may be slightly delayed when operating the game console.

"Selecting the Projection Quality (Selecting Color Mode)" p.40

• When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance".

Connecting a Computer

To project images from a computer, connect the computer using one of the following methods.

When using the optional or commercially available computer cable

Connect the computer's display output port to the projector's Computer port. You can output audio from the projector's speaker by connecting the audio output port on the computer

to the projector's Audio port using a commercially available audio cable.

When using a commercially available USB cable

Connect the computer's USB port to the projector's USB-B port. You can send the computer's audio with the projected image.

When using a commercially available HDMI cable

Connect the computer's HDMI port to the projector's HDMI port. You can send the computer's audio with the projected image.

Connecting Equipment