Basic Operations
26
c
•
Auto V-Keystone only functions when Front is selected as the Projection mode. s Settings -
Projection p.49
•
If you do not want to use the Auto V-Keystone function, set Auto V-Keystone to Off. s Settings -
Keystone - Auto V-Keystone p.49
Correct manually (H-Keystone adjuster)
Move the horizontal keystone adjuster to the right or left to perform horizontal keystone correction.
You can make effective corrections within a projection angle of 30° left to right.
c
When using the horizontal keystone adjuster, set H-Keystone Adjuster to On.
s
Settings -
Keystone - H-Keystone Adjuster p.49
Correct manually (H/V-Keystone)
You can use the buttons on the control panel to correct keystone distortion.
Press the
buttons to display the V-Keystone/H-Keystone gauges.
When the gauges are displayed, press the
buttons to perform vertical correction, and press the
buttons to perform horizontal correction.
When the top or bottom is too wide