Name: Epson EH-TW5200
Brand: Epson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Adjusting the Image

Mode Application

3D Dynamic

For use when projecting 3D images. Images are bright and sharper than 3D Cinema.

3D Cinema

For use when projecting 3D images.

Switching the Screen Between Full and Zoom (Aspect)

You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projection

screen.

The available Aspect varies depending on the image signal currently being projected.

Press the button.

You can make settings from the

Configuration menu.

Signal -

Aspect p.47

Use the buttons to

select the setting name, and then

press the

button to confirm the

selection.

Aspect may not be available

depending on the type of signal.

By normally selecting Auto, the optimum aspect is used to display the input signal. Change the setting if you

want to use a different aspect.

The table below shows the image projected on a 16:9 screen.

Input Image Setting Name (Aspect)

Normal Full Zoom

4:3 Images

16:9 Images

When projecting 16:9 images, Full and Zoom cannot be

selected.

Images Recorded Using

Squeeze

Letterbox Images

Other manuals for Epson EH-TW5200

Questions and Answers:

Need help?

Do you have a question about the Epson EH-TW5200 and is the answer not in the manual?

Projection Specifications

native resolution	1080p (1920 x 1080)
f-number	1.58 - 1.72
focal length	16.9 - 20.28 mm
zoom ratio	1 - 1.2
throw ratio	1.22 - 1.47 (Wide - Tele)
lamp type	200W UHE
lamp life (normal / eco)	5, 000 hours / 6, 000 hours
screen size (projected distance) - zoom : wide	34” - 328” [0.9 - 9.0 m]
screen size (projected distance) - zoom : tele	34” - 328” [1.08 - 10.8 m]