Troubleshooting
57
Indicators Status Remedy
(blue)
(orange)
Internal Error
The projector has malfunctioned.
Remove the power plug from the electrical outlet, and contact
your local dealer or the nearest Epson repair center.
s Epson
Projector Contact List
(blue)
(orange)
Fan Error
Sensor Error
(blue)
(orange)
Auto Iris Error
(blue)
(orange)
Power Err. (Ballast)
(blue)
(orange)
Lamp Error
Lamp Failure
Lamp Cover Open
There is a problem with the lamp, or it failed to turn on.
•
Disconnect the power cord, and then check if the lamp is cracked.
s p.70
If it is not cracked, reinstall the lamp and turn on the power.
If reinstalling the lamp does not fix the problem, or if the lamp is
cracked, remove the power plug from the electrical outlet, and
contact your local dealer or the nearest Epson repair center.
s Epson Projector Contact List
•
Check that the lamp cover has been properly closed.
•
If the air filter is clogged, clean it. s p.68
•
When using at an altitude of 1500 m or more, set High Altitude
Mode to On.
s Extended - Operation - High Altitude
Mode p.51
To Next Page
Loading...
