Basic Operations
31
d
Press the up/down/left/right buttons
to adjust the shape of the image as
necessary. Press the [Enter] button to
return to the area selection screen.
c
If you see this screen, you cannot
adjust the shape any further in the
direction indicated by the gray
triangle.
e
Repeat steps 3 and 4 as needed to
adjust any remaining corners.
f
When you are finished, press the
[Esc] button.
c
After executing Quick Corner, the
Keystone setting is now set to
Quick Corner in the projector's
Settings menu. When you press
the up/down buttons on the
control panel or the keystone
button on the remote control, the
area selection screen is displayed.
To Next Page
Loading...
Need help?
General
