Adjusting the Image
36
a
Press the [Menu] button to display
menus in the order Image - Auto Iris.
Remote control Control panel
b
Use the up and down buttons to select
the item, and then press the [Enter]
button to confirm the selection.
c
Depending on the image, you may hear the Auto Iris operating, but this is not a malfunction.
Setting Frame Interpolation
You can play fast moving images smoothly by automatically producing intermediate frames between the
original frames.
Frame Interpolation is available under the following conditions.
•
When Image Processing is set to Fine. s Signal - Advanced - Image Processing p.51
•
Image Preset Mode is set to anything other than Off. s Image - Image Enhancement - Image Preset Mode p.50
•
When inputting 2D signals or 3D signals (1080p 24 Hz). s p.78
a
Press the [Menu] button to display
menus in the order Image - Image
Enhancement - Frame
Interpolation.
Remote control Control panel
b
Use the up and down buttons to select
the item, and then press the [Enter]
button to confirm the selection.
Setting the Image Processing Speed
Improves the response speed for images projected at high-speed, such as games.
This is only available when receiving a progressive signal input.
a
Press the [Menu] button to display
menus in the order Signal -
Advanced - Image Processing.
Remote control Control panel
b
Use the up/down buttons to switch
between Fine and Fast.
To Next Page
Loading...
Need help?
General
