Troubleshooting
58
Indicators Status Remedy
(blue)
(orange)
Internal Error
The projector has malfunctioned.
Remove the power plug from the electrical outlet, and con-
tact your local dealer or the nearest Epson repair center.
s Epson Projector Contact List
(blue)
(orange)
Fan Error
Sensor Error
(blue)
(orange)
Auto Iris Error
(blue)
(orange)
Power Err. (Ballast)
(blue)
(orange)
Lamp Error
Lamp Failure
Lamp Cover Open
There is a problem with the lamp, or it failed to turn on.
•
Disconnect the power cord, and then check if the lamp is
cracked.
s p.72
If it is not cracked, reinstall the lamp and turn on the power.
If reinstalling the lamp does not fix the problem, or if the lamp
is cracked, stop using the projector, remove the power plug
from the electrical outlet, and contact your local dealer or the
nearest Epson repair center.
s Epson Projector Contact List
•
Check that the lamp cover has been properly closed.
To Next Page
Loading...
Need help?
General
