Epson EH-TW9200 User Manual

Introduction
11
Remote Control
Button Function
a
Turns the projector on. s p.25
b
Allows you to simultaneously project two im‐
age sources, one in the main screen and the
other in the sub screen. (Picture in Picture)
s p.63
Press and hold the button to swap the main
or sub screen image sources.
c
Changes to the image from each input port.
s p.26
button is only available for EH-
TW9200W/EH-TW8200W.
d
This button displays the settings menu for
HDMI Link.
With the other buttons, you can then start or
stop playback, and so on for connected devi‐
ces that meets the HDMI CEC standards.
s p.61
e
Changes between 2D and 3D. s p.45
f
Selects menu items and adjustment values.
s p.65
g
The adjustment value returns to its default
value when pressed while the menu's adjust‐
ment screen is displayed.
s p.65
h
Displays and closes the Configuration menu.
On the Configuration menu, you can make
adjustments and settings for Signal, Image,
Input Signal, and so on.
s p.65
i
Sets Auto Iris. s p.38
j
Performs the function assigned to the user
button.
s p.70
k
Saves, loads, or erases a memory. s p.42

Epson EH-TW9200 Specifications

Display

projection system	3LCD Technology, RGB liquid crystal shutter
resolution	Full HD 1080p, 1920 x 1080, 16:9
color light output	2, 400 lumen
white light output	2, 400 lumen
contrast ratio	600, 000 : 1

Optical

projection ratio	1.34 - 2.87:1
zoom factor	1 - 2.1
projection size	30 inches - 300 inches
projection distance wide	0.9 m - 9 m (100 inch screen)
projection distance tele	1.9 m - 19.2 m (100 inch screen)
focal distance	22.5 mm - 47.2 mm

Power and Energy

lamp power	230 W, 176 W (economy mode)
energy use	334 W, 270 W (economy)
lamp durability	4, 000 h, 5, 000 h (economy mode)

Weight and Dimensions

product dimensions	466 x 140 x 395 mm (Width x Depth x Height)
product weight	8.4 kg
carton dimensions	575 x 510 x 350 mm