Epson EMP-TW10 - Spécifications

Spécifications-61
Appendix.fm7/22/03
Spécifications
Des CI Pixelworks sont utilisés dans ce projecteur.
MODEL Home Projector EMP-TW10
Safety
USA (100-120VAC)
UL1950 3
rd
Edition
Canada (100-120VAC)
CSA C22.2 No.950-95 (cUL)
European Community (200-240VAC)
The Low Voltage Directive (73/23/EEC)
IEC60950 2
nd
Edition, +Amd.1,
+Amd.2, +Amd.3, +Amd.4
EMC
USA (100-120VAC)
FCC 47CFR Part15B Class B (DoC)
Canada (100-120VAC)
ICES-003 Class B
European Community (200-240VAC)
The EMC Directive (89/336/EEC)
EN55022, 1998 Class B
EN55024, 1998
IEC61000-4-2, IEC61000-4-3,
IEC61000-4-4, IEC61000-4-5,
IEC61000-4-6, IEC61000-4-8,
IEC61000-4-11,
IEC61000-3-2, IEC61000-3-3
Australia/New Zealand (200-240VAC)
AS/NZS 3548:1995, A1:1997, A2:1997,
Class B
CISPR Pub.22:1993, A1:1995, A2:1996,
Class B
Dimensions 402(W)×114(H)×294(D)mm (not including feet)
LCD Size 0.55" wide
LCD Driving
Method
Poly-silicon TFT Active Matrix
Pixel number 854 × 480 pixels
Projection
Type
Manual zoom/focus
Projection
Zoom ratio
1-1.54
Lamp Type UHE Lamp 132W
Sound output 1W Monaural
Power
Consumption
100-240VAC 50/60Hz 2.3-1.0A
Operating
temperature
+5°C to +35°C (41°-95°F) (No condensation)
Weight Approx. 3.6kg
Connectors
Input A port
SCART
1
4RCA pin jack
Component 3RCA pin jack
Input B port 1
Mini D-Sub
15pin(female)
S-Video port 1 Mini DIN 4pin
Video port 1 RCA pin jack
Audio port 1
RCA pin
jack×2(L,R)
Control (RS-232C) port 1
D-Sub 9
pin(male)
USERS_F.BOOK Page 61 Tuesday, July 22, 2003 4:09 PM