Epson EPL-N4000 - Page 136

4-24
SelecType
Flamingo
Rev. C
A5 size SELEC.FM
11/5/98 Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
GL-Mode
Specifies the GL/2 operation mode; either GLlike (HP pen plotter
emulation) or LJ4GL2 (HP LaserJet 4 GL/2 emulation).
Scale
Specifies the original output size from the plotter’s software. The
actual output size will be reduced to the Page Size set in the
Printing Menu.
Origin
Specifies whether the logical origin of the “plotter” is from the
corner or the center of the paper.
Pen
Allows you to choose a pen which you can then set the thickness
for in the
Pen 0 through 6
menu item. The LJ4GL2 mode supports
two pens (0 and 1), while the GLlike mode supports seven pens
(0 through 6).
End
Specifies the way in which lines end.
Join
Specifies the way in which lines are joined.
Pen
Pen0
, Pen1, Pen2, Pen3, Pen4, Pen5, Pen6
End
Butt
, Square, Triangular, Round
Join
Mitered
, Miteredbeveled, Triangular,
Round, Beveled, None
Pen 0 through 6 0.05 ...
0.35
... 5.00 mm in 0.05 increments
Item Values