Epson EPL-N4000 - PJL Commands

C-14
Command Summary
Flamingo
Rev. C
A5 size APPCOMM.FM
11/5/98 Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
PJL Commands
This section lists the available commands for printer job language mode
(PJL). For more information on PJL, refer to the Printer Job Language
Technical Reference Manual from Hewlett-Packard.
COMMENT @PJL COMMENT [words] [<CR>] <LF>
DEFAULT @PJL DEFAULT [LPARM: ***] variable = value [<CR>]
<LF>
DINQUIRE @PJL DINQUIRE [LPARM: ***] variable [<CR>] <LF>
ECHO @PJL ECHO [Words] [<CR>] <LF>
ENTER @PJL ENTER LANGUAGE = *** [<CR>] <LF>
EOJ @PJL EOJ [NAME= ***] [<CR>] <LF>
INFO @PJL INFO read only variable [<CR>] <LF>
INITIALIZE @PJL INITIALIZE [<CR>] <LF>
INQUIRE @PJL INQUIRE [LPARM: ***] variable [<CR>] <LF>
JOB @PJL JOB [NAME = ***][START = ***][END = ***][<CR>]
<LF>
OPMSG @PJL OPMSG DISPLAY = *** [<CR>] <LF>
RDYMSG @PJL RDYMSG DISPLAY = *** [<CR>] <LF>
RESET @PJL RESET [<CR>] <LF>
SET @PJL SET [LPARM: ***] variable = value [<CR>] <LF>
STMSG @PJL STMSG DISPLAY = *** [<CR>] <LF>
UEL <ESC>%-12345X
USTATUS @PJL USTATUS variable = value [<CR>] <LF>
USTATUSOFF @PJL USTATUSOFF [<CR>] <LF>
PJL @PJL [<CR>] <LF>