1
Printing with the EPL-N4000
1-3
Flamingo
Rev. C
A5 size LOADING.FM
11/5/98 Pass 0
R
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
Labels
Use only labels designed for laser printers or plain-paper copiers.
Use the MP tray and lower cassettes to print on these materials.
To prevent the adhesive from coming in contact with printer
parts, always use labels that completely cover the backing sheet
so that no gaps occur between the individual labels.
Test the label sheet for leaking adhesive by pressing a sheet of
paper on top of a sheet of labels. If the paper sticks to the label
sheet when you lift it off, do not use the labels.
Envelopes
Printing quality on envelopes may be irregular because different
parts of an envelope have different thicknesses. If the printing is
too light, adjust the print density in the printer driver or the
printer’s control panel.
Note:
Because thickness and surface characteristics are especially important
for envelopes, test a sample for print quality and proper feeding before
you buy a large number of envelopes.
Colored paper
You can use colored paper as long as it meets the weight limits
shown in the paper specifications. Do not, however, use coated
paper (paper to which a clear or colored coating has been added).
Transparencies
You can use overhead projector transparencies and adhesive
drafting film if they are made for use with plain-paper copiers or
laser printers. Load these media into a lower cassette or the MP
tray.
To Next Page
Loading...
