Epson EPL-N4000 - Face-Up Tray

3-16
Options
Flamingo
Rev. C
A5 size OPTIONS.FM
11/5/98 Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
6. Lift up the Duplex Unit with both hands.
After removing
1. Reconnect any interface cables you removed.
2. Make sure the printer is turned off. Plug the power cord into
an electrical outlet.
3. Turn on the printer.
Face-up Tray
Installation and removal procedures differ depending on whether
the optional Duplex Unit is installed.
Installing the Face-up Tray (without the Duplex Unit installed)
Follow the instructions below if you will not install the optional
Duplex Unit on your printer.