Epson EPL-N4000 - ESC;P 2 and FX Commands; ESC;P 2 Mode

C-8
Command Summary
Flamingo
Rev. C
A5 size APPCOMM.FM
11/5/98 Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
ESC/P 2 and FX Commands
This section lists the printer commands supported in the ESC/P 2 and FX
emulation modes.
ESC/P 2 mode
General operation
Initialize printer ESC @
Control paper loading/ejecting ESC EM
n
Paper feeding
Carriage return CR
Form feed FF
Line feed LF
Select 1/8-inch line spacing ESC 0
Select 1/6-inch line spacing ESC 2
Set n/180-inch line spacing ESC 3
n
Set n/360-inch line spacing ESC +
n
Page format
Set page format ESC ( c
nn
Set page length in defined units ESC ( C
nn
Set page length in lines ESC C
n
Set page length in inches ESC C 0
n
Set bottom margin for continuous paper ESC N
n
Cancel top/bottom margin for
continuous paper ESC O
Set left margin ESC l
n
Set right margin ESC Q
n