3
Options
3-47
Flamingo
Rev. C
A5 size OPTIONS.FM
11/5/98 Pass 0
R
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
After removing
1. Reconnect any interface cables you removed.
2. Make sure the printer is turned off. Plug the power cord into
an electrical outlet.
3. Turn on the printer.
Memory modules
By installing a memory module in both open slots, you can
increase printer memory up to 256 MB. You may want to add
memory if you are having difficulty printing complex, graphics-
intensive pages, using the Multibin Unit with the Duplex Unit, or
if you regularly use numerous downloaded fonts.
You can purchase memory modules from various vendors. Be
sure the memory module you purchase meets the following
requirements.
❏ Synchronous Dynamic RAM Double In-line Memory Module
(SD RAM DIMM)
❏ 168-pin type, 64 bit, with SPD
❏ Capacity of 16, 32, 64, or 128 MB
❏ Access speed of 66.66 MHz or higher (15 ns or less)
❏ Height of less than 40 mm
To Next Page
Loading...
