2-6
Control Panel
Flamingo
Rev. C
A5 sizeCONPANE.FM
11/5/98Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
Enter
Selects the corresponding OneTouch
mode option listed above this button
if in OneTouch mode 1 or 2, or
accepts the setting currently shown
on the display as a new setting when
in SelecType mode. Press this button
two times when the printer is on line
to print the status sheet.
Form Feed
When the printer is off line and data
remains in the printer’s memory
(Form Feed light is on), prints out the
data and clears the buffer.
Continue
(
Reset
)
Enables the printer to resume
printing after certain maintenance-
required conditions or errors have
been cleared. If the Continue light is
flashing, read the status or error
message on the display and correct
the problem as described in “Status
and Error Messages” on page 5-24. If
used in combination with the
ALT
button, the printer is reset.
To Next Page
Loading...
