3
Options
3-33
Flamingo
Rev. C
A5 size OPTIONS.FM
11/5/98 Pass 0
R
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
Installing the side brackets
1. Open the box inside and take out the bracket that fits on the
right side of the Large Capacity Paper Unit (see illustration).
2. Align the two pins on the bracket with the holes on the right
side of the printer. Insert the pins into the Large Capacity
Paper Unit, then lower the bracket until it is firmly attached.
3. Insert one of the included screws shown above into the hole
in the bracket and tighten.
4. Remove the protective cover from the remaining bracket, then
repeat steps 2 and 3 to install the bracket to the left side of the
printer.
To Next Page
Loading...
