3
Options
3-51
Flamingo
Rev. C
A5 size OPTIONS.FM
11/5/98 Pass 0
R
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
After installing
1. Replace the plate to its original position. Place the two outside
tabs of the plate under the edge of the opening with the inside
tabs on top of the edge.
2. Push the plate down into place.
3. Tighten the two screws that you loosened earlier.
4. Gently replace the top cover until it clicks shut.
To confirm that the memory module is installed correctly, print a
status sheet.
To Next Page
Loading...
