18
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
L
Proof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
Cover DM Open
Cover DM, on the left side of the optional Duplex Unit,
is open. Pull the latch on cover DM and push back to
close.
DM Error xxx
An error has occurred on the optional Duplex Unit. Turn
off the printer, wait 5 seconds, then turn the printer back
on.
If the message still appears, call your dealer or a
qualified service person.
Duplex Mem Overflow
There is not enough memory for duplex printing. The
printer prints only on the top side and ejects the paper.
To correct this error, follow the directions below.
If
Auto Cont
is
Off
in the SelecType Config menu, (1)
press
Continue
or (2) reset the printer by pressing the
ALT
and
Reset
at the same time.
If
Auto Cont
is
On
in the SelecType Config menu, the
error is corrected automatically.
Face-down Full
The face-down tray is full with printed sheets. Remove
the sheets from the face-down tray and press
Continue
.