22
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
L
Proof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
Manual Feed xxx yyy
Manual Feed mode is specified for the current print job.
Make sure the paper size indicated by yyy is loaded in
xxx paper source, then press
On Line
.
If you do not want to print this job in manual mode,
press
Continue
. The printer feeds paper according to
the Paper Source setting.
For detailed information on the Manual Feed mode, see
“Printing one sheet at a time” on page 1-12 of your
Reference Guide
.
Mem Overflow
The printer has insufficient memory available for the
current task. To correct the error, press
Continue
. If the
message remains, press
Reset
.
You can also clear this error by turning the printer off
and back on again. However, it may be necessary to
reduce the number or size of fonts, reduce the number
or size of graphics, lower the resolution, or add more
memory to the printer.
Menus Locked
SelecType, which is usually accessible from the printer’s
control panel, has been disabled. This message can be
cleared in the Remote Control Panel utility by clearing
the
Panel Lock
check box on the Panel menu. To change
this setting, consult your printer’s administrator.
To Next Page
Loading...
